Lake Tahoe – Summer Splendor Cornhole Wrap Design
Lake Tahoe – Summer Splendor Cornhole Wrap Design
Couldn't load pickup availability
An Anderson Design Group exclusive design.
These high-quality cornhole vinyl wraps are as easy to install. Just peel and stick. The hole is not cut out to allow for proper trimming on a set-by-set basis.
Size: 24" x 48"
How to install our cornhole decals
What you need to get started:
Chuggles Original Cornhole Decals are the simplest way to stylize your cornhole boards with having to pick up a paintbrush.
Items you need to install your cornhole decal:
- Hands
- Cornhole board
- Exacto knife, razor or similar sharp knife
Step 1
To make it easier to adjust the decal in the correct location, it is recommended that your cornhole board playing surface is sanded smooth then painted with high gloss latex paint or stained with a gloss finish. This high gloss finish will make sure the decals stick and not peel up.
Step 2
Peel back about 3 inches of the decal backing and adhere to the top corners.
Step 3
Slowly peel away the back of the decal while pushing out any air bubbles.
Step 4
Carefully use a sharp knife to cut away the vinyl where the hole is as well as any excess around the edges.
Step 5
Use a soft cloth to rub out any air bubbles.
Step 6
To extend the life of your cornhole decals, spray or brush on a clear water based polyurethane.
Step 7
Call friends and let the fun begin.